Who am I?
kristoyanova
A little bit about the person behind the writing
development
Organizational Dignity As Terminal Value
dignitybydesign
The organization that harmed someone, provided intervention, and watched that person recover and return to contribution, points to this sequence as evidence of its own moral adequacy; individual survival and recovery becomes organizational proof.
My fully offline AI-assisted Linux development machine
Technorage
My Arch Linux, Niri, and local AI coding setup on the ASUS ROG Flow Z13
Updating OEM Dahua NVR and IP Cameras and removing region lock via firmware update
Anson Liu
I recently got a set of 10 Dahua IP eyeball cameras and 16 port PoE NVR. The camera and NVR are actually white branded Dahua which is an OEM brand for other vendors selling IP cams and NVRs. The previous owner got these before Dahua was banned from the USA and transitioned the USA side of the...
Mountains Majesty: On the Summit with John Fielder exhibit at History Colorado Center in Denver, Colorado
Anson Liu
My Colorado 3D Topographic Maps are used as supporting locator maps at the Mountains Majesty: On the Summit with John Fielder exhibit at the History Colorado Center in Denver, Colorado. These maps were printed in multiple colors presenting a light base map and dark rivers. Labels were placed on...
3D Maps and Models available on Printables and not on MakerWorld
Anson Liu
My maps and models continue to be available Printables. You will find my latest uploads and updates on Printables but not on MakerWorld. The 3D map of China got reported on MakerWorld so the account got banned and models delisted. You will find my models previously available on MakerWorld on...
3D Map Feature Modifier (MFM) Post Processor
Anson Liu
You can add elevation contour lines and color changes to your 3D printed maps with a new script that I created. The Map Feature Modifier (MFM) script is compatible with Prusaslicer, OrcaSlicer, and Bambu Studio. It is also open source and free to use! Download it here. Elevation Contour...
Adaptive Start G-code for Dual Extruder Printers with Cura
Anson Liu
Choosing a reliable start G-code that primes a dual extruder printer is difficult. There are different extruder prime techniques and my adaptive priming start G-code for Cura uses a mix of these techniques to properly prime the most single/dual nozzle printers. Prime Techniques Too little...
Manually Resuming a Failed Print at a Specific Layer
Anson Liu
If your print fails due to an extruder error you can usually resume printing from the last successful layer if your print has not detached from the bed. Manually creating the resume G-code may be needed if your printer does not have a built in recovery function. The exact steps need some G-code...
Creality K1 series 3D Printer Cura Start G-code
Anson Liu
The default Creality start G-code for the K1 printer in Cura does not automatically set the correct extruder and bed temperature and you can change the start G-code to automatically set the right temperature for your material. Creality Slicer is now based on Orcaslicer instead of Cura but you can...
Ultimaker S3/S5/S7 3D Printer PrusaSlicer Profile
Anson Liu
Sometimes you just have to go off the rez (in a fun exploratory way). Ultimaker 3D printers usually print 3D files sliced using the Ultimaker Cura slicer software. Cura has more user exposed settings accessible through the GUI compared to Slic3r forks such as PrusaSlicer and Bambu Studio. Cura...
Ford Escape Hybrid (2005-2007, 1st generation) Plug-in Cross-Charge Jumpstart
Anson Liu
A 1st generation (2005-2007) Ford Escape Hybrid with a “dead” 330V high voltage (HV) battery can be manually charged from wall outlet with the use of a 12V charger when the voltage has dropped extremely low. Most Ford Escape Hybrids from 2005-2007 are still using the original hybrid battery packs...
My sleek and modern Linux development machine in 2021
Technorage
My 2021 GNU/Linux development machine explained
My VS Code setup - Making the most out of VS Code
Technorage
How I have configured VS Code to make the most out of it for development.
My beautiful Linux development environment
Technorage
My GNU/Linux development machine explained
Why I’m moving away from Medium
Technorage
I moved to Dev from Medium and here are the reasons.
Recurrent Convolutional Neural Networks for Text Classification
knok
I made a simple implementation of text classification with Recurrent CNN. https://github.com/knok/rcnn-text-classification It uses chainer, a Deep Learning framework. Recurrent convolutional neural networks for text classification Siwei Lai, Liheng Xu, Kang Liu, Jun Zhao, Chinese Academy of...